PIBSI Dispersant
Approx. Rs 185 / Kilogram
- Minimum Order Quantity: 180 Kilogram
- Usage/Application: Lubricant and fuel additives
- Usage: Industrial
- Physical State: Liquid
- Grade Standard: Technical Grade
- Packaging Size: 190 Kgs
- Packaging Type: Drums
PIBSI Dispersant & Emulsifier is a ashless succinimide lubricating oil additive with extended thermal stability. It is generally used with alkaline detergents, corrosion and oxidation inhibitors, in gasoline and diesel engine oils. This additive provides excellent low temperature sludge and varnish control in gasoline engines and effective dispersancy for deposit control in both medium-speed and high temperature super-charged diesel engines.
It is also used extensively in the explosive industry for its emulsification properties.
Formulations
Recommended At
|
By Weight
| 0.5% - 5.0% |
By Volume
| 0.5% - 5.0% |
in crank case engine oils, in combination with detergent and inhibitor chemicals to improve lubricant dispersancy properties for engines operating under low and high temperature conditions.
Application
- Lubricant and fuel additives
- Emulsifiers
- It diffuse sludge, carbon, soot, oxidation products, and other deposit precursors in engine oils. The result is reduced deposit formation, less oil oxidation, and less viscosity increase.
- An ashless dispersant additive with low chlorine content.
Specification Sheet
CHEMICAL |
NITROGEN, WT% | ASTM D5291 | 1.2 |
TBN, MG KOH/G | ASTM D2896 | 21 |
PHYSICAL |
SPECIFIC GRAVITY, @ 15.6°C | ASTM D4052 | 0.915 |
FLASH, COC °C | ASTM D92 | 175 |
VISCOSITY, CST @ 100°C | ASTM D445 | 90-330 |
HANDLING & STORAGEMaximum temperatures of 90 °C for handling and 45 °C for longterm storage are recommended. Ordinary precautions for handling concentrated chemicals and blending additives into base oils should be observed.
Material safety data sheet of pibsi dispersant & emulsifier
Chemical Product & Company Identification
- Product Trade Name : PIBSI Dispersant & Emulsifier
- Generic / Chemical Name :Industrial Lubricant/Additive
- Preparation / Revision Date
- Transportation Emergency : Phone no. 022-28390698
Composition / Information Of Ingredients
- Specia1, High Molecular Weight, Polyisobutylene Succinic Imide (PIBSI) and Poly Iso Butylene Succinic Amide with higher Nitrogen contents (PIBSA).
- Specially manufactured for performance in diesel engine dispersants additive, Blended with superior grade industrial base oils.
- Hazardous Ingredients This material has no known hazards under applicable laws.
Hazard's Identiication
- Principal Hazards
- This material has no known hazards.
- See section 11 for complete health hazard information.
First Aid Measures
- Oral : DO NOT INDUCE VOMITING. If conscious, give 2 glasses of water. Get immediate medical attention.
- Eye : Flush with water at least 15 minutes. Get medical attention if eye irritation develops or persists.
- Skin : Wash with soap and water. Get medical attention if irritation develops. Launder contaminated clothing before reuse.
- Inhalation : Remove exposed person to fresh air if adverse effects are observed.
- Additional Note to physician : Treat Symptomatically
Fire Fighting Measures
- Flash Point : 175°C PMCC
- Upper Flammable Limit: N /A
- Lower Flammable Limit: N /A
- Extinguishing Media: Water, CO2
- Special Firefighting Procedures: NORMAL
Additional Information:- Item Code: PIBSI
- Port of Dispatch: Nhava Sheva
- Delivery Time: 2-3 Weeks
- Packaging Details: 190 Kg Drums
PIBSA - Poly Isobutylene Succinic Anhydride
Approx. Rs 190 / Kilogram
- Minimum Order Quantity: 1000 Kilogram
- Physical State: Liquid
- Usage/Application: Industrial
- Packaging Size: 190 Kg
- Packaging Type: Drum
- Brand: Goodway
- Country of Origin: Made in India
PIBSA is an ash less, non-fatty, high viscosity surfactant additive.
Pibsa is a polyisobutenyl succinic anhydride (PIBSA) derived from polybutene. It is commonly used as an intermediate in the manufacture of oil soluble dispersants for lubricating oil applications and in the manufacturing of emulsifiers.
Formulations
Pibsa is recommended for use at 3 to 14% wt in base oils.
Benefits
- Good wettability properties
- Clean annealing characteristics
- Good emulsibility properties
- Non-staining towards aluminum
- Lubricant additives
- Drilling fluids
Handling & StorageMaximum temperatures of 82°C (180°F) for handling and 49°C (120°F) for long-term storage are recommended. Ordinary precautions for handling concentrated chemicals and blending additives into base oils should be observed.
Specification Sheet
Physical |
Specific Gravity, At 15.6°c | ASTM D4052 | 0.954 |
Density, Lb/gal At 60°f | ASTM D4052 | 7.72 |
Flash, Coc °c | ASTM D92 | 175 |
Viscosity, Cst At 100°c | ASTM D445 | 500 - 900 |
Color, Dilute | ASTM D1500 | 3.0 |
Additional Information:- Item Code: PIBSA
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
- Port of Dispatch: Nhava Sheva
- Delivery Time: 2-3 Weeks
- Packaging Details: 180 Kg Drums